|
Grease that thing!
 Machines
are dangerous. Keeping them lubricated properly and running smoothly
can literally be a killer! Lincoln Automatic Lubrication Systems
keep maintenance personal clear of any and all rotating and moving
parts. Grease and / or oil lubricants are safely and automatically
delivered to each dedicated bearing point.
No one needs to be in danger anymore. Plus, your machines stay
lubricated, running smoothly, with production continuing. All automatically!
Just too cool!
Stuart M. Davis, Inc. is your Authorized Lincoln Automatic Lubrication
Source, specializing in:
- Keeping your people safe.
- Keeping your machines running smoothly!
- Design
- Upgrades
- Installation
- Repair.
Get started NOW! Call or email us now. (Click
here for our contact page).
Lincoln Industrial manufactures automatic grease and oil delivery
systems for up to 400 (four-hundred) lubrication points. All from
a single dedicated, Lincoln lubrication system.
Each Lincoln Automatic Lubrication System is custom designed
for your exact application., allowing you control the quantity and
/ or the frequency of each lubrication event. Lubrication dontrols
include either Lincoln’s own included solid-state timers or use
your own in-house PLC to control lubrication frequency.
Lincoln Automatic Lubrication Systems solve virtually 97% of
all lubrication needs.
120 VAC, 230 VAC, 12 VDC, 24 VDC, hydraulic, pneumatic and manual
Lincoln systems are all available.
Get started NOW! Call or email us now. (Click here for our contact
page).
Lincoln’s Centromatic Lubrication system delivers precise, adjustable
quantities of grease and / or oil directly to each individual lubrication
point.
When commanded to start running (via your PLC, Lincoln’s stand-alone
timers, or through a manual, operator controlled switch or pump)
the automatic lubrication process starts. As lubrication pressure
builds, a pressure switch monitors lubrication system pressure until
the system’s “set” pressure is reached.
Once pressure has been reached, the pump is commanded to shut-down.
If set pressure is not reached within a five (5) minute interval,
a fault alarm is triggered, signaling your operators of trouble
with the system (low lubricant level, broken feed line, etc.).
When the lubrication pump is shut-down, lubrication pressure
is “vented” back to the system reservoir. Once pressure drops below
200 psi, each individual Lincoln Centromatic injector “fires’ it’s
measured shot into the lube line, delivering lubricant to that specific
point.
- Systems for one (1) up to 400 + individual lubrication points
are available.
- Pneumatic, hydraulic, electric and manual Lincoln grease
and / or oil systems are available.
- Each system is designed exclusively for your specific requirements.
- Stainless Steel is available
Stuart M. Davis, Inc. is your Authorized Lincoln Automatic Lubrication
Source, specializing in:
- Keeps your people safe.
- Keeps your equipment running smoothly.
- Design
- Upgrades
- Installation
- Repair
Get started NOW! Call or email us now. (Click
here for our contact page).
Lincoln’s Orsco Systems are designed specifically those applications
where oil cannot drip, or be sprayed onto your product (Food processing,
Furniture Mfgs., Ovens, etc.). Those industries where dripping and
misting oil is totally unacceptable, use Lincoln Orsco Chain Oiling
Systems.
Lincoln’s Orsco Systems deliver ultra-precise, microdroplets
(NOT a spray!) of oil directly to each pin on your drive chain or
lubrication point. When commanded to start running (via your PLC
or Lincoln Orsco’s included timers), small oil and air control valves
are systematically cycled. High pressure oil and low pressure air
are sent to each lubrication point’s patented Orsco nozzle assembly.
The oil is reduced to micro droplet size. Low pressure air at the
nozzle assembly literally blows the microdroplets to the chain pins.
Precisely. Accurately.
Ultra precise control of the oil provides industry with a non-dripping,
non-misting solution for chain lubrication.
- Systems using your PLC controls (VS & VSR Series)
- Chain Lubrication Systems using Lincoln / Orsco’s built
in timer (170, 200, 300 Series)
- Up to three individual control stations and six points available.
Video demonstration of the Orsco System (link here to Lincoln’s’
video demo - Stuart is getting that needed web address)
Link here to Lincoln
/ Orsco website.
Stuart M. Davis, Inc. is your Authorized Lincoln / Orsco Automatic
Chain Lubrication Source, specializing in:
- Keep your people safe.
- Keep your product clean!
- Design
- Upgrades
- Installation
- Repair.
Get started NOW! Call or email us now. (Click here for our contact
page).
Lincoln’s QuickLube Lubrication system delivers precise, measured
quantities of grease and / or oil directly to each individual lubrication
point,. Used as an economical alternative to Lincoln’s Centromatic
(direct, individually adjustable, injection system), Lincoln’s QuickLube
Systems are the choice for many OEMs and Users throughout the world.
Lincoln’s QuickLube Systems (grease or oil) are available as:
- 6, 8, 12 and 18 point, dedicated systems, with all connections
at the pump / reservoir assembly, or
- Up to 100 points, using a single 2, 4 or 8 liter reservoir
pump. Lincoln’s QuickLube Automatic Lubrication Systems can
meet all but the heaviest system requirements, all at a very
reasonable cost.
When commanded to start running (via your PLC or Lincoln’s included
solid-state timers) the lubrication pump starts. Lubricant is pumped
to individual Divider Blocks (containing individual spool valves
to deliver specific amounts of grease or oil). Each Divider block
is specifically designed for your exact application, delivering
precise quantities of lubricant within the selected time.
- Systems for one (1) up to 100 + individual lubrication points
are available.
- Timers are provided, or use your own PLC to operate the
pumps.
- Over the Road trailer lubrication systems available, using
the trailer brake light circuit to control system timing.
- Electrically driven grease and / or oil pumps are available,
12 VDC, 24VDC, 120 VAC, 230 VAC.
- 1, 2, 4, and 8 liter reservoirs are available.
- Pushlock, feruled and pipe fittings available.
- Each system is designed exclusively for your specific requirements.
- Stainless Steel is available
Link
here
to Lincoln’s QuickLube Website.
Stuart M. Davis, Inc. is your Authorized Lincoln Automatic Lubrication
Source, specializing in:
- Keep your people safe.
- Keep your machines running smoothly.
- Design
- Upgrades
- Installation
- Repair.
Get started NOW! Call or email us now. (Click
here for our contact page).
|
